by Josh Adams | Nov 5, 2022
Plating Vacuum Chamber We were contracted to engineer and design two small vacuum chambers for use in coating metal plates. The chamber included a custom-designed table to accommodate the chiller and vacuum pump. It had to be engineered to prevent tip-over because the...
by Josh Adams | Oct 5, 2022
8 ft Cylindrical Vacuum Chamber We were contracted to engineer and design an 8 ft vacuum chamber for use in an aerospace application. The chamber included an smaller antechamber connected to the large chamber and separated with a gate valve. This allows the user to...
by Josh Adams | Feb 5, 2022
32 in Cube Vacuum Chamber We were contracted to engineer and design a small cube-shaped vacuum chamber with a heated and cooled platen for use as a standard chamber product. Our client used our design to fabricate, assemble, integrate controls, and test the chamber...
by Josh Adams | Feb 4, 2022
Large Diamater Thermal Vacuum Chamber We were contracted to design and engineer a large 16′ diameter Thermal Vacuum Chamber (TVAC) to simulate the environment of space. The chamber was so large that we had to design and engineer a special hinge to accommodate...
by Josh Adams | Jul 28, 2021
SPACE SIMULATION TVAC Chamber Universities and labs doing research for the space industry require equipment where conditions unique to space can be simulated. Along with Redline Chambers, Inc. we designed a chamber for the University of South Florida based on their...
