by Josh Adams | Nov 5, 2022
Plating Vacuum Chamber We were contracted to engineer and design two small vacuum chambers for use in coating metal plates. The chamber included a custom-designed table to accommodate the chiller and vacuum pump. It had to be engineered to prevent tip-over because the...
by Josh Adams | Aug 2, 2022
Livingston House Heat Transfer Finite Element Analysis Bob Bacon, architect and owner of R.J. Bacon Design, retained Apollo to model the thermal effects of the Central Arizona desert climate on a new home design whose thermal envelope would be comprised of nearly 60%...
by Josh Adams | Feb 4, 2022
Large Diamater Thermal Vacuum Chamber We were contracted to design and engineer a large 16′ diameter Thermal Vacuum Chamber (TVAC) to simulate the environment of space. The chamber was so large that we had to design and engineer a special hinge to accommodate...
by Josh Adams | Jul 28, 2021
SPACE SIMULATION TVAC Chamber Universities and labs doing research for the space industry require equipment where conditions unique to space can be simulated. Along with Redline Chambers, Inc. we designed a chamber for the University of South Florida based on their...
by Josh Adams | Feb 28, 2021
Telescope Vacuum Chamber Designed by Cornell University, this telescope project required a portion of the assembly to be under vacuum as well as subjecting specific portion to cryogenic temperatures. We assisted Redline Chambers, Inc. with weld sizing and verification...
